AES-IntelliNet Product Range

AES IntelliNet

AES-IntelliNet offer a wide range of alarm systems featuring secure data communications

Cost reduction: No monthly telephone, GSM/GPRS or tower-based private radio fees.
Range: Long range coverage (campus, city, region, country) without towers
High Security: Encrypted signaling on a single unknown VHF/UHF frequency and no lines can be cut.
Reliability: Greater reliability than any other form of data communications
Jam resistant: Due to multiple communications paths, AES systems cannot be sucessfully jammed.
Flexibility: Can be used for many other applications such as electricity meter reading, vehicle tracking and home arrest solutions.

AES Central Receivers

ModelSecurity,
Fire or
Control
Monitoring
Dual or
Single
Receiver
Requires an
AES 7100
PC
Local/Remote
Monitoring
ULNotes
7003 SLSecurity & ControlSingleYesLocal only 100 or Less Accounts supported. Has integral transceiver.
7003 SSecurity & ControlSingleYesLocal only Unlimited accounts. Has integral transceiver.
7003 DHigh Security & ControlDual1 x IncludedLocal only Unlimited accounts. Has integral transceiver.
7004 SentryRemote SecuritySingleLaptop IncludedLocal only Unlimited accounts. Has integral transceiver.
7005i S or D MultiNetSecurity & ControlSingle or DualNo PC needed - Embedded Linux includedLocal & remote Can monitor multiple AES networks and comes with 1 or 2 x 7170 EM Transceiver(s)
7700 ULFireDual2 x IncludedLocal onlyXUnlimited accounts UL/NFPA-72 approved.
7705i UL* MultiNetFireDualNo PC needed - Embedded Linux includedLocal & remoteXCan monitor multiple AES networks and comes with 2 x 7170 EM Transceivers
7170 EM* TransceiverFire, Security or ControlN/AN/ALocal & remoteXExternal transceiver, which allows AES radio to IP concentration with phone back-up used to extend monitoring coverage remotely


Notes:
7705i MultiNet with 7170-EM Transceiver are currently awaiting UL approvals*.
AES Central Receivers support Ademco & Radionics automation output
AES fully recommends Bold Communications Ltd or MicroKey Inc alarm automation software as they have been tested with our product.

AES Subscriber Transceivers

ModelType of MonitoringInput Zones SupportedIntelliTap or FireTap SupportedOutputs SupportedNotes
7350-ITKSecurity or Control4IntelliTapAES USDIFitted and powered from within an existing alarm panel
7450-XLSecurity4IntelliTapAES USDICan house a 7.2 AH battery, AC power required
7450-XLTSecurity4IntelliTapAES USDISame as 7450-XL but includes IntelliTap PCB. AC powered
7050-EFire, Security or Control8IntelliTap & FireTapAES USDICan be powered by AC or DC
7050-DLRFire, Security or Control8 expandable to 72Not Supported8, 16, 32, 48 or 64 relay outputsProvides two-way control of remote devices. AC or DC powered.
7750-FFire & AA Burglary4 or 8IntelliTap & FireTapN/AUL listed, NFPA-72 Compliant. AC powered
7750-ULFire & AA Burglary16N/AN/AUL listed, NFPA-72 Compliant AC powered
7555 RT IntelliTrakVehicle Tracking with Panic AlarmGPS
1 x Panic
1 x Lock
Status.
6 Free
N/A2 relay outputsSends vehicle GPS coordinates through the AES network. Data provided: Time of Operation, Location & Boundary and Speed Limits exceeded plus Panic attack signal.
7047 IntelliGuardHome arrestWristband transmitter
Tilt switch
Door Tamper
1 Free
N/AN/AMonitors bracelet and communicates with AES Network. Adjustable monitoring distance from 15m to 60m


Our fixed subscribers also offer as standard:

  • Programmable Input Zones (NO, NC, EOL, Restoral and Direct Voltage).
  • Monitoring for phone line and antenna cuts.
  • Battery backup facility.
  • Alarm on low battery and mains failure.
  • 4 LED's showing transceiver status and ensuring easy diagnostics.

AES Optional equipment

  1. USDI (Universal Serial Data Interface) firmware upgrade allows two-way communication via an RS232 port on the AES subscriber transceiver. AES 7350, 7450 and 7050-E models support USDI. The device being attached to the subscriber must support the required USDI protocol.
  2. 7768 - FireTap, Connects to many well-known fire alarm control panels and outputs the full data provided to the AES Subscriber.
  3. 7067 - IntelliTap II (UL) allows the AES Subscriber transceiver to connect to a security alarm panel digital dialer, supports Contact ID, 4 +1 and 3+1 formats and sends alarm signal via the AES Network. If a telephone line is available, this interface can also be used to provide a phone backup for the AES Subscriber.
  4. NEMA 4 waterproof enclosure for outdoor protection.
  5. Additional IP-Links (7170-EM Transceivers) can be purchased to connect remote networks to an AES central receiver.
  6. 7500 IntelliTrak Client/Server software runs on a separate Windows based platform and interfaces with the AES receiver system to provide vehicle-tracking graphics on a real-time display.

August 2006

RSS