SubscribeSystem specifications for the µPremium-EM RFID Reader
- Power Supply : DC +5,0V to 13,6V
- Power consumption : Average 100mA ( 80mA @ 5 Vdc )
- Transmitting Radio Frequency : 125KHz ( also available for Mifare technology on 13,56 Mhz.
Click here for further details. ) - Read range with internal antenna:
@ 5,5 tot13,6 Vdc :
Key tag with 20mm coil : 85mm
ISO card with 50mm coil : 175mm
@ 5,0 Vdc :
Key tag with 20mm coil : 80mm
ISO card with 50mm coil : 160mm - Indicator : 3 LEDs (Greed/Red/Yellow) + Buzzer
Buzzer emits a 60ms beep at 4 kHz when a transponder is read.
In addition sounder operates while BUZZER input is pulled low. - Transponder types supported : 40 bit read only transponders
EM4x01 family, HiTag2 Public Mode A, TEMIC e5550 and equivalent devices 
RFID DataOutput format : DIP-switch selectable:
Wiegand ( 26, 34 and 42 bit)
Clock/Data ( 8, 10 and 13 characters )
RS232 ( 2400, 4800 and 9600 Bd )
TTL ( 2400, 4800 and 9600 Bd )- Transmission : Continuous (while tag in the field) or single transmission
- Wiring : 10-wire cable ( approx 1 m length )
- Weight : 90g MAX
- Operating Temperature : -20° ~ +60°
- Mounting : Mullion or wall mount ( Extra mounting plate is supplied with each reader)
- Dimensions : 89 x 45 x 16 mm, optional spacer plate 89 x 45 x 7 mm
Features
The µPREMIUM-EM type is a contactless reader device in the frequency range of 125 kHz. This reader support the transponder types EM4x02, Hitag 2 in Public Mode A, TEMIC e5550 and equivalent devices. Due to the fully potted housing, the reader can be installed both indoors and outdoors.
An integrated DIP-switch allows easy selection of 1 of 12 possible output formats.
A three-colour LED indication and audible tone enhance user feedback. Both beeper and LED's can be controlled by the host system.
Also available : µPREMIUM-MF : our multi-protocol reader for 13.56 MHz Mifare technology !!!
