SubscribeThe programmable telecontroller device Barionet and its accessories communicate in Modbus with each other, to outside systems they can be connected via standard interfaces (SNMP, CGI, HTTP, Modbus/TCP).
They are ideal for automation and monitoring applications in buildings, industry and IT systems.
Barix Barionet
Network-enabled, programmable automation controller for industrial automation and facility management systems
Barix teaches nearly every device and system the meaning of TCP/IP. Barix Barionet is an IP-enabled, programmable automation controller for telemtry applications that connects to digital, analog and serial connected sources. With its wide range of connection possibilities and its combined network technology, this intelligent device can be used in industrial automation, facility management systems and building automation.
Features
- Communicates over a standard 10/100 Mbit/s Ethernet connection and is equipped with RS-232 and RS-422/485 interfaces
- Provides 12 analog and digital inputs/outputs for the connection of temperature sensors, readers and devices
- Supports TCP/IP, SNMP, HTTP and CGI
- Is easily controlled and configured using your standard web browser
Applications
- Facility management system
- Building automation
- Remote control and monitoring of machines
- Data acquisition, storage and transmission in any technical system
Barix R6
The Barix R6 is a Modbus/RTU relay for building and industrial automation.
This Modbus/RTU relay supports the industry standard Modbus/TCP protocol using the RS-485 interface, thus every other Modbus-enabled control.
Features
- 6 Relays (250 VAC/16 A, NO and NC)
- RS-485 serial interface with Modbus/RTU-protocol support
- DIN-rail mountable
- Two extension connectors for easy daisy chaining of power supply, additional relay units (R6), I/O units (IO12) etc.
Applications
- Building automation (Switching light, blinds, heating, power relays, motors etc.)
- Activation of door strikes, bells, indicators, alarms etc.
Barix X8
Decentralized, digital Modbus I/O to RS-485 converter
Modbus I/O to RS-485 converter that perfectly fits into any small box due to its tiny form factor.
Features
- Eight independent, configurable I/O (inputs/outputs)
- Modbus/RTU protocol
- Connections for LED displays, temperature and humidity sensors
- Wiegand interface
Applications
- General Modbus I/O to RS-485 converter
- Remote monitoring of rooms, buildings and sensitive infrastructure
- Local temperature and humidity reading using Barix TS and Barix THS sensors
Barix IO12
Digital I/O unit for remote I/O automation
Extension module to connect standard I/O automation (12/24 V) to the Barix Barionet.
Features
- 12 solid state outputs (up to 1.5 A at 6 to 30 VDC)
- 12 ESD protected inputs (opto isolated in groups of 4, 10 to 30 VDC)
- RS-485 (2-wire) serial interface, Modbus/RTU protocol
- Two extension connectors for easy daisy chaining of power supply, additional I/O units (IO12), relay units (R6) etc.
Applications
- Remote monitoring, switching, counting and remote control of digital signals.